Course Care 

Repairing Ball-Marks

  1. Always start at the back of the mark and push forward with the repairer.
  2. Use the repairer around all sides and slowly ease the turf toward the centre of the mark. Do not lift the soil upwards.
  3. Tap down lightly with a putter.

Repairing Divots

  1. Remove any loose turf from the affected area.
  2. Knock in all of the edge of the divot with your club or your shoe.
  3. Sand area (be careful not to use too much sand).

Bunkers

Before leaving a bunker, players should carefully fill and smooth over all holes and footprints made by him, and then leave the rake with the handle pointing toward the tee of the hole being played.

  1. Always enter the bunker at the lowest point.
  2. Pull the rake toward you as you exit the bunker.
  3. If required, rake other affected areas.
  4. Do not pile sand at the edge of the bunker. Push back excess sand with reverse side of rake.

Bunker Rake Policy

Always leave the rake in the flat of the bunker with the handle pointing towards the tee of the hole being played and parallel to the line of flight of the ball. Rakes should be placed as far from the edge as possible.








logo facebooklogo twitter Plumpton Road, Wagga Wagga, NSW 2650
Phone: (02) 6922 6444
email: admin@wwcc.com.au
golf system footer off

st george crop   hd crop  rctcrop  rsmCROP  kilbroganCROP     

                
nosubhealth online pharmacybuy xanax onlinebuy phentermine onlineampills.com